Table Of Contents Chapter 1: Introduction 9 1.1 Fleet Operations Workspace Core Overview 9 1.2 How the Fleet Operations Workspace Components Work Together 10 EM2100 10 MobilePlanner 11 SetNetGo 12 ARAMCentral 12 ARAM 13 MARC 13 1.3 Fleet Operations Workspace Licensing 13 1.4 How Can I Get Help? 14 Related Manuals 15 Chapter 2: Safety and Regulatory Information 17 2.1 Safety and Regulatory 17 2.2 Warnings, Cautions, and Notes 17 2.3 General Safety Precautions 17 2.4 Safety Commissioning 18 2.5 What to Do in an Emergency 19 2.6 Additional Safety Information 19 Mobile Robot LD Safety Guide 19 Chapter 3:
Fleet Manager Configuration and Operation 21 3.1 EM2100 Configuration Overview 21 Configuration Tasks Overview 21 3.2 Power Interruptions 22 Power Interruptions on a Standalone EM2100 22 Power Interruptions on an Autosync Appliance 22 3.3 Set the IP Address on a Client PC's Network Adapter 23 3.4 Connect Your PC to SetNetGo on the EM2100 23 Configure Access and Security 24 3.5 Configure Management Interface Network Settings 24 3.6 Configure the Fleet Interface Network Settings 25 3.7 Configure Paired Appliances 26 EM2100 Autosync — Ethernet Cabling 26 Tasks in Autosync Setup 26 Configure the Primary Appliance 27 Configure the Secondary Appliance 28 3.8 Configure Each AMR to Connect to the Fleet Manager 29 AMR Configuration Settings 29 Fleet-Level Settings 30 3.9 What to do if an EM2100 Primary Fleet Manager Fails 31 3.10 Remove and Replace EM2100 Appliances from Autosync 31 Remove a Primary Fleet Manager Appliance from Autosync 31 20569-020 Rev.
A Fleet Operations Workspace Core User's Guide 3