Figure 5-2. SetNetGo Interface For details on the interface elements, see the remaining topics in this chapter. 5.3 MobilePlanner Operator Account Overview Some sign-ins to MobilePlanner will be restricted to an Operator account (you can also select the MobilePlanner (Operator Mode) from the Windows Start menu). An Operator account provides a limited set of tools for interfacing with AMRs or the Fleet Manager. Its main window, the Fleet window, shows the status of all AMRs in your fleet and their jobs, and allows for simple interventions in job execution sequences. Operator Mode does not support any setup operations, and the Map, Config, and SetNetGo windows are unavail- able.
MobilePlanner Operator Account Interface Operator Mode’s simplified user interface focuses on monitoring fleet AMRs and jobs. It uses graphical elements to represent AMR statuses, and the status of all jobs (complete, in-progress, canceled, etc.). To force the launch of MobilePlanner Operator Mode, click the Windows Start menu, and select Start > All Programs > Omron > MobilePlanner5 > MobilePlanner (Operator Mode) . When MobilePlanner (Operator Mode) opens, enter the IP address of an AMR or Fleet Man- ager, and click Connect . Figure 5-3. MobilePlanner Operator Mode UI The MobilePlanner (Operator Mode) interface allows you to connect to and monitor multiple AMRs.
MobilePlanner Operator Mode Jobs Tab The Jobs tab displays all jobs assigned to the AMRs (listed by job ID). For debugging purposes, you can also add a job to the currently monitored AMR by clicking the Add Job button (lower 20569-020 Rev. A Fleet Operations Workspace Core User's Guide 49