2.3 Compliance and Intended Use use must also comply with all applicable local and national requirements and safety stand- ards. Intended Use OMRON robots are not intended for use in any of the following situations: l In hazardous (explosive) atmospheres l In the presence of ionizing or non-ionizing radiation l In life-support systems l In residential installations l Where the robot will be subject to extremes of heat or humidity l Without appropriate guarding, to prevent people from coming into contact with it ! WARNING: PERSONAL INJURY OR PROPERTY DAMAGE RISK.
The instructions for operation, installation, and maintenance given in this guide and the robot user’s guide must be strictly observed. Non-intended use of OMRON robots can: l Cause injury to personnel l Damage the robot or other equipment l Reduce system reliability and performance If there is any doubt concerning the application, ask your local OMRON support to determine if it is an intended use or not. ! DANGER: PERSONAL INJURY OR PROPERTY DAMAGE RISK. An industrial robot can cause serious injury or death, or damage to itself and other equipment, if the following safety precautions are not observed.
l All personnel who install, operate, teach, program, or maintain the system must read all applicable and associated documentation and complete a training course for their responsibilities in regard to the robot. l All personnel who design the robot system must read all applicable and associated doc- umentation and must comply with all local and national safety regulations for the loc- ation in which the robot is installed. l The robot system must not be used for purposes other than described in Intended Use. Contact your local OMRON support if you are not sure of the suitability for your applic- ation.
l The user is responsible for providing safety barriers around the robot to prevent anyone from accidentally coming into contact with the robot when it is in motion. 12 Robot Safety Guide 18304-000 Rev. F