NQPSMTR Supplemental Notes SRV-2000 Factory: Power on while holding WRITE and REVERB NON-LINEAR. Delay Mode: Power on while holding WRITE, REVERB NON-LINEAR and ROOM SIMULATE. SSC-8004 No ROM reset. SX-700 Press UTILITY. Use PARAMETER LEFT ( ) to select FACT INIT. Press WRITE. TB-303 No ROM reset. TD-5 Power on while holding EDIT and START/STOP, then press START/STOP again. TD-7 Press SYSTEM. Use the LEFT ( ) CURSOR buttons to select INI, then press ENTER. Cursor to HI HAT and use the DATA dial to select ALL. Press ENTER twice. TD-10 Press SETUP, then press F4 three times. TL-Series No ROM reset. TP-20 No ROM reset. TR-505 Power on while holding MODE and PATTERN GROUP KEY A .
TR-626 Power on while holding MODE and TRACK #1. TR-707 Power on while holding TRACK WRITE and TRACK #1 . TR-727 Power on while holding TRACK WRITE and TRACK #1 . TR-808 No ROM reset. TR-909 Power on while holding TRACK #1 and PATTERN #1 . U-20 No ROM reset. U-110 Power on while holding PART and EDIT. U-220 No ROM reset. VG-8 Power on while holding F1, F3, and F5. Press F6 for All, F4 for Patches, or F2 for System. VK-7 Power on while holding MAIN, SUB and PEDAL in the HARMONIC BAR PART section. VK-1000 Press WRITE, then press F3 to access the INIT MENU screen. Press F4 to access the COLD BOOT screen, then press ENTER. VP-70 Power on while holding PLAY, VOICE EXPANSION, and MIDI.
VS-840 No ROM reset. VS-880 No ROM reset. VS-1680 No ROM reset VT-1 Power on while holding down the PRESET/USER button. W-30 No ROM reset. W-50 Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN (v) to select ALL. Press VALUE UP (^). XP-10 Press UTILITY. Use VALUE + and - to select INITIALIZE, then press ENTER. Use VALUE + and - to select FACTORY PRESET, then press ENTER. XP-50 Press DISK/UTILITY, select SOUND, select PRESET, then press ENTER. Use the dial to turn Memory Protect OFF if necessary, then press ENTER twice. XP-60/80 Press UTILITY, press F6 (MENU) twice to select Factory, then ENTER. Press F6 (EXECUTE).
Use the dial to turn Memory Protect OFF if necessary, press ENTER, then press F6 (EXECUTE). © 1998 Roland Corporation U.S. Re-initialization Procedures Faxback # 90006 Page 8 of 8