Solving Problems > Paper Feeding Problems > Removing Jammed Originals from the Scanner Paper Feeding Problems Multiple Originals Are Fed (Double Feed) Check the following when a double feed occurs. ❏ When originals are jammed inside the scanner, open the scanner cover and remove the originals, and then close the scanner cover. ❏ Check the scanned image, and then scan the originals again if necessary. If multiple originals are fed frequently, try the following. ❏ If you load unsupported originals, the scanner may feed multiple originals at a time. ❏ Clean the rollers inside the scanner. ❏ Reduce the number of originals being placed at a time.
❏ Select Slow on the control panel to slow down the scanning speed. ❏ Use Automatic Feeding Mode , and scan originals one by one. Related Information & “Scanning Different Sizes or Types of Originals One by One Continuously (Automatic Feeding Mode)” on page 128 You can scan different sizes or types of originals one by one using Automatic Feeding Mode. In this mode, the scanner starts scanning automatically when originals are loaded into the scanner. & “Cleaning Inside the Scanner” on page 147 & “Removing Jammed Originals from the Scanner” on page 173 Removing Jammed Originals from the Scanner If an original has jammed inside the scanner, follow these steps to remove it. Note:
Epson Smart Panel does not support scanning for long paper (393.8 mm (15.5 in.) or more). 1. Remove all originals remaining in the input tray. 2. Pull the lever and open the scanner cover. 173