Scanner Basics > Part Names and Functions Part Names and Functions Front 18 A Control panel Indicates the scanner’s status and allows you to make scanning settings. B Edge guides Feeds originals straight into the scanner. Slide to the edges of the originals. C Input tray Loads originals. Pull out the tray extension if originals are too big for the input tray. This prevents paper from curling and causing paper jams. When removing the input tray, slide the hooks that are on both ends at the back, and then pull out the input tray. D Input tray extension E ADF (Automatic Document Feeder) Feeds loaded originals automatically. F Output tray Holds originals ejected from the scanner.
Pull out the output tray extension to the length of the originals. G Output tray extension H Stopper Prevents ejected originals from falling of fthe extension tray. Adjust it to the length of the originals.