Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Chec … Checking the Network Connection Status using the Network Icon You can check the network connection status and strength of the radio wave using the network icon on the scanner's home screen. Displaying Detailed Network Information on the Control Panel When your scanner is connected to the network, you can also view other network-related information by selecting the network menus you want to check. 1. Select Settings on the home screen. 2. Select Network Settings > Network Status . 3. To check the information, select the menus that you want to check.
❏ Wi-Fi Status Displays the network information (device name, connection, signal strength, and so on) for Wi-Fi connections. ❏ Wi-Fi Direct Status Displays whether Wi-Fi Direct is enabled or disabled, and the SSID, password and so on for Wi-Fi Direct connections. 192 Displays the network connection status. Select the icon to check and change the current settings. This is the shortcut for the following menu. Settings > Network Settings > Wi-Fi Setup The scanner is not connected to a wireless (Wi-Fi) network. The scanner is searching for SSID, unset IP address, or having a problem with a wireless (Wi-Fi) network. The scanner is connected to a wireless (Wi-Fi) network.
The number of bars indicates the signal strength of the connection. The more bars there are, the stronger the connection. The scanner is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode. The scanner is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.