Administrator Information > Backing Up the Settings > Import the settings Items for Email Notification Backing Up the Settings You can export the setting value set from Web Config to the file. You can use it for backing up the contacts, setting values, replacing the scanner, etc. The exported file cannot be edited because it is exported as a binary file. Export the settings Export the setting for the scanner. 1. Access Web Config, and then select the Device Management tab > Export and Import Setting Value > Export . 2. Select the settings that you want to export. Select the settings you want to export. If you select the parent category, subcategories are also selected.
However, subcategories that cause errors by duplicating within the same network (such as IP addresses and so on) cannot be selected. 3. Enter a password to encrypt the exported file. You need the password to import the file. Leave this blank if you do not want to encrypt the file. 4. Click Export . c Important: If you want to export the scanner’s network settings such as the device name and IPv6 address, select Enable to select the individual settings of device and select more items. Only use the selected values for the replacement scanner. Related Information & “Running Web Config on a Web Browser” on page 26 Import the settings Import the exported Web Config file to the scanner.
207 Items Settings and Explanation Administrator password changed Notice when administrator password has been changed. Scanner error Notice when the scanner error has occurred. Wi-Fi failure Notice when the error of the wireless LAN interface has occurred.