Administrator Information > Advanced Security Settings > Using a Digital Certificate 7. Send the CSR to a certificate authority and obtain a CA-signed Certificate. Follow the rules of each certificate authority on sending method and form. 8. Save the issued CA-signed Certificate to a computer connected to the scanner. Obtaining a CA-signed Certificate is complete when you save a certificate to a destination. Related Information & “Running Web Config on a Web Browser” on page 26 CSR Setting Items Importing a CA-signed Certificate Import the obtained CA-signed Certificate to the scanner. c Important: ❏ Make sure that the scanner’s date and time is set correctly. Certificate may be invalid.
❏ If you obtain a certificate using a CSR created from Web Config, you can import a certificate one time. 1. Access Web Config and then select the Network Security tab. Next, select SSL/TLS > Certificate , or IPsec/IP Filtering > Client Certificate or IEEE802.1X > Client Certificate . 2. Click Import A certificate importing page is opened. 214 Items Settings and Explanation Key Length Select a key length for a CSR. Common Name You can enter between 1 and 128 characters. If this is an IP address, it should be a static IP address. You can enter 1 to 5 IPv4 addresses, IPv6 addresses, host names, FQDNs by separating them with commas.
The frist element is stored to the common name, and other elements are stored to the alias field of the certifci ate subject. Example: Scanner's IP address : 192.0.2.123, Scanner name : EPSONA1B2C3 Common Name : EPSONA1B2C3,EPSONA1B2C3.local,192.0.2.123 Organization/ Organizational Unit/ Locality/ State/Province You can enter between 0 and 64 characters in ASCII (0x20-0x7E). You can divide distinguished names with commas. Country Enter a country code in two-digit number specifei d by ISO-3166. Sender's Email Address You can enter the sender's email address for the mail server setting. Enter the same email address as the Sender's Email Address for the Network tab > Email Server > Basic.