Specifications and Placing of Originals > Specifications of Originals > General Specifications for Origin … *1 Fold in half to set. *2 Originals that are wider than 215.9 mm (8.5 in.) need to be folded in half. *3 The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original approximately 297 mm (11.7 in.) long. Otherwise, the length of the scanned image may be longer than intended as the scanner scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in the application. Note: You cannot scan originals using the Carrier Sheet using Epson Smart Panel on smart device.
Related Information & “Carrier Sheet Codes” on page 29 Specifications of Envelopes The specification of envelopes you can load into the scanner. 36 Type Size Thickness Loading Capacity of the Carrier Sheet Originals that cannot be loaded directly into the scanner A3*1 A4 B4*1 Letter Legal*1 B5 A5 B6 A6 A8 Custom size: ❏ Width: up to 431.8 mm (17 in.) *2 ❏ Length: up to 297 mm (11.7 in.) *3 0.3 mm (0.012 in.) or less (excluding the thickness of the Carrier Sheet) 10 sheets Size Measurement Thickness Loading Capacity C6 114×162 mm (4.49×6.38 in.) (standard size) 0.38 mm (0.015 in.) or less 10 envelopes DL 110×220 mm (4.33×8.66 in.) (standard size)