Specifications and Placing of Originals > Placing Originals > Irregular Shaped Originals Note: ❏ You may need to stop using a Carrier Sheet that is scratched or has been scanned more than 3,000 times. ❏ To scan both sizes and stitch them together, set the appropriate setting in the Epson Scan 2 window. When you are using Epson ScanSmart, you can open the window by pressing the Settings button > Scanner Settings tab > Scan Settings . Select Double-Sided from Scanning Side and select Left & Right from Stitch Images in the Epson Scan 2 window. See the Epson Scan 2 help for details.
❏ When scanning a Carrier Sheet by selecting Auto Detect as the Document Size setting, the image is automatically scanned by applying Paper Skew in the Correct Document Skew setting. ❏ The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original approximately 297 mm long. Otherwise, the length of the scanned image may be longer than intended as the scanner scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in the Epson Scan 2 window. ❏ Only use the Carrier Sheet designed for your scanner.
The Carrier Sheet is automatically recognized by the scanner by detecting two small rectangular holes on the front edge. Keep the holes clean and not covered. Related Information & “Carrier Sheet Codes” on page 29 & “Required Settings for Special Originals in Epson Scan 2 Window” on page 127 Irregular Shaped Originals Specifications of Irregular Shaped Originals By using the Carrier Sheet sold separately, you can scan originals that are wrinkled, curled, very thin, or irregularly shaped. 55 Size Thickness Loading Capacity of the Carrier Sheet Up to A4 0.3 mm (0.012 in.) or less (excluding the thickness of the Carrier Sheet) 10 sheets