Specifications and Placing of Originals > Placing Originals > Envelopes Note: ❏ You may need to stop using a Carrier Sheet that is scratched or has been scanned more than 3,000 times. ❏ If you cannot find an appropriate size for the original you want to scan in the Document Size list, select Auto Detect . When using Epson Scan 2, you can also select Customize to create a custom document size. ❏ When scanning a Carrier Sheet by selecting Auto Detect as the Document Size setting, the image is automatically scanned by applying Paper Skew in the Correct Document Skew setting. ❏ Do not leave photos inside the Carrier Sheet for a long time. ❏ Only use the Carrier Sheet designed for your scanner.
The Carrier Sheet is automatically recognized by the scanner by detecting two small rectangular holes on the front edge. Keep the holes clean and not covered. Related Information & “Carrier Sheet Codes” on page 29 & “Required Settings for Special Originals in Epson Scan 2 Window” on page 127 Envelopes Specifications of Envelopes The specification of envelopes you can load into the scanner. 61 Size Measurement Thickness Loading Capacity C6 114×162 mm (4.49×6.38 in.) (standard size) 0.38 mm (0.015 in.) or less 10 envelopes DL 110×220 mm (4.33×8.66 in.) (standard size)