Specifications and Placing of Originals > Placing Originals > Mixture of Originals 4. Slide the edge guides to fit the edge of the envelopes making sure there are no gaps between the envelopes and the edge guides. Otherwise, the envelopes may be fed skewed. Note: ❏ We recommend selecting the appropriate rotation angle or Auto as the Rotate setting in the application. ❏ To scan envelopes, set the appropriate setting in the Epson Scan 2 window. When you are using Epson ScanSmart, you can open the window by pressing the Settings button > Scanner Settings tab > Scan Settings . Select Main Settings tab > Detect Double Feed > Off . See the Epson Scan 2 help for details.
Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the envelope from the ADF and then reload it, tap DFDS Function on the control panel’s screen to set it to On which disables Detect Double Feed for the next scan, and then scan again. The DFDS Function (Double Feed Detection Skip function) only disables Detect Double Feed for one sheet. Related Information & “Required Settings for Special Originals in Epson Scan 2 Window” on page 127 Mixture of Originals Specifications of Originals that are a Mixture of Different Sizes You can load a mixture of originals from 50.8Ч50.8 mm (2.0Ч2.0 in.) to A4 (or Letter) size.
You can also load a mixture of paper types or thickness. c Important: ❏ When placing and scanning originals that are a mixture of different sizes, originals may be fed askew because not all of the originals are supported by edge guides. ❏ Originals may be jammed or fed askew if you set different types or very different sizes of originals, such as in the following cases. · Thin paper and Thick paper · A4 size paper and card size paper If originals are fed askew, check whether or not the scanned image is available. 64