IV. Engine and vehicle body bottom 1. Vehicle body bottom: Check if the fuel pipe, brake oil pipe and bottom protection layer are damaged; check if the exhaust pipe leaks and if fastening is reliable. 2. Steering tie rod: Check the clearance; check if the connection is reliable and if dustproof cover is damaged. 3. Brake lining: Check the thickness. 4. Parking brake: Check and adjust the length of cable if necessary. 5. Tire (including spare tire): Check the worn condition of tire; check the tire pressure. 6. Wheel alignment: Check with wheel aligner. 7. Wheel fixing bolt: Check according to specified torque. 8. Headlamp: Check and a. 9. Trial run: Check the performance.
Abbreviations in this manual A AC Alternating current ACC Air conditioning clutch ACMC Air conditioning magnetic clutch ACT Air charge temperature A/C Air conditioning ABDC After bottom dead center ABS Anti-lock brake system A/D Aanalog/digit A/F Air/fuel ratio AFS Air flow meter (air flow sensor) A-ELR Automatic/emergency locking retractor (of safety belt) ATDC After top dead center API American Petrol Institude ATF Automatic transmission fluid ALR Automatic locking retractor (of safety belt) ASD Automatic switching-over device A/T Automatic transmission B BATT Battery B ＋ Battery positive pole BBDC Before bottom dead center 16