(5) TRITEC 1.
6 engine controller pin (see Table 1-2) Table 1-2 30 S/N Mark Name Resistance value Tolerance J1-01 V-IGK Ignition switch 11.9K ±0.1% J1-02 V-EL Main relay output 1.8K ±0.1% J1-03 VS Vehicle speed sensor ∞ J1-04 TMAP-VCC Pressure/temperature sensor power supply 189.2K ±10K J1-05 TPS-GND Throttle position negaive 0.6 0.2Ω J1-06 VSL-U-1B Front oxygen sensor grounding end ∞ J1-07 J1-08 J1-09 ACCIN A/C compressor switch input 9.9K ±0.1K J1-10 CAM Camshaft input positive 5.0K ±0.1K J1-11 K-LINE Diagnostic line 143.2K ±1K J1-12 CRK Crankshaft sensor input negative 55.2K ±1K J1-13 J1-14 CANL CAN low ∞ J1-15 CANH CAN high 18M ±2M J1-16 J1-17 VBAT Battery voltage positive ∞ J1-18 VBAT Battery voltage positive ∞ J1-19 J1-20 TPSVCC Throttle position positive ∞ J1-21 TMPGND Temperature/pressure low 0Ω ±0.
5Ω J1-22 Exhaust MIL 65.5M ±1M J1-23 AD4 AD4 1.8M ±0.2M J1-24 TPS Throttle position sensor signal ∞ J1-25 J1-26 EVAP Evaporated liquor temperature sensor signal 6.2K ±0.1K J1-27 TIA Intake air temperature signal 3.3K ±0.2K J1-28 CRKGND Crankshaft sensor low 55.5K ±0.5K J1-29 J1-30 J1-31 MIL Malfunction indicator light 56.7K ±0.7K J1-32 IGC Ignition coil 1,4 1.3M ±0.5M J1-33 STPBH Stepper motor B+ 20.3K ±O.2K J1-34 STPBL Stepper motor B- 20.5K ±0.1K