Bosch — Cleaning the power brush for hard floors

▶ Charge the battery using the original Installing the appliance en charging cable 1 or the original quick charger 1 . ▶ Only use batteries from the Power for Cleaning the appliance Cleaning the appliance Cleaning the appliance Requirement: The appliance is switched off. ALL 18 V series. Note: The power supply unit on the char- ging cable 1 and the appliance heat up while charging. This is normal and harm- less. 1. Disconnect the appliance from the char- ging cable 1 . 2. Clean the appliance and the accessory with a soft cloth and a commercially available plastic cleaner. Charging using the charging cable → Fig.

9 - 10 Emptying the dust container Emptying the dust container Charging in the base station ▶ Ensure that children do not play with the Cleaning the filter unit Emptying the dust container → Fig. 25 - 28 Cleaning the filter unit appliance, even when it is in the base station 1 . → Fig. 11 - 12 Cleaning the filter unit ▶ Never allow the filters to come into con- tact with liquids. → Fig. 29 - 35 1 Charging using the quick charger Cleaning the power brush Cleaning the power brush 1. Press the release button and remove the battery to the rear. → Fig. 13 2. Observe the enclosed instructions. Cleaning the power brush for hard floors Cleaning the power brush → Fig.

36 - 38 Cleaning the power brush for hard floors Installing the appliance Installing the appliance Cleaning the power brush for hard floors → Fig. 39 - 41 Installing the appliance → Fig. 14 - 15 Switching on the appliance Switching on the appliance Switching on the appliance ▶ Press ⁠. → Fig. 16 Setting the power Setting the power Setting the power → Fig. 17 - 18 Vacuuming with accessories Vacuuming with accessories Vacuuming with accessories → Fig. 19 - 20 Storing accessories Storing accessories Storing accessories → Fig. 21 - 22 Using the flexible extension hose Using the flexible extension hose Using the flexible extension hose → Fig. 23 - 24 1 Depending on the appliance specifications 21