7.3.2. Adding a CIP Device Add Robot Controller as a CIP device that can be used with Sysmac Studio. When using safety devices other than those produced by Omron, the relevant CIP device file needs to be installed first in order to be used by Sysmac Studio. 14 1 Extract the compressed CIP device file. CIP Safety XXX CIP Safety XXX _ _ _ _ * Place the file in any location XXXX.zip XXXX on the personal computer. (Compressed file) (Folder after extraction) The following folder and file are contained in Folder after extraction. XXX XXXX _ ・devices folder ・CIP Device Addition.exe _ _ *The CIP device files to be installed this time are contained in the devices folder.
*CIP Device Addition.exe is _ _ XXX YYYYY Robot Safety Slave 0 the program file to install the _ XXX YYYYY Robot Safety Slave 1 CIP device files (contained in _ the devices folder) on XXX YYYYY Robot Safety Slave _2 Personal computer.
XXX YYYYY Robot Safety Slave _3 XXX YYYYY Robot Safety Slave 4 _ XXX YYYYY Robot Safety Slave 5 _ XXX YYYYY Robot Safety Slave 6 _ XXX YYYYY Robot Safety Slave 7 _ XXX YYYYY Robot Safety Slave 8 _ XXX YYYYY Robot Safety Slave 9 _ XXX YYYYY Robot Safety Slave 10 _ XXX YYYYY Robot Safety Slave 11 _ XXX YYYYY Robot Safety Slave 12 _ XXX YYYYY Robot Safety Slave 13 _ XXX YYYYY Robot Safety Slave 14 _ XXX YYYYY Robot Safety Slave 15 _ Double-click CIP Device Addition.exe to _ _ execute the program. *If the User Account Control Dialog Box is displayed at start, make a selection to start.
2 3 XXX YYYYY Robot Safety Slave 0 _ XXX YYYYY Robot Safety Slave 1 _ XXX YYYYY Robot Safety Slave 2 _ XXX YYYYY Robot Safety Slave 3 _ XXX YYYYY Robot Safety Slave 4 _ XXX YYYYY Robot Safety Slave 5 _ XXX YYYYY Robot Safety Slave 6 _ XXX YYYYY Robot Safety Slave 7 _ XXX YYYYY Robot Safety Slave 8 _ XXX YYYYY Robot Safety Slave 9 _ XXX YYYYY Robot Safety Slave 10 _ XXX YYYYY Robot Safety Slave 11 _ XXX YYYYY Robot Safety Slave 12 _ XXX YYYYY Robot Safety Slave 13 _ XXX YYYYY Robot Safety Slave 14 _ XXX YYYYY Robot Safety Slave 15 _