7.3.3. Starting Sysmac Studio and Going Online Start Sysmac Studio and go online with the Safety Controller. 17 1 Turn ON Safety Controller and Robot Controller. 2 Start Sysmac Studio. *If the User Account Control Dialog Box is displayed at start, make a selection to start Sysmac Studio. 3 Sysmac Studio is started. Click Connect to Device. 4 The Connect to Device Dialog Box is displayed. Select Safety Network Controller as a device to connect. Select Direct connection via Ethernet and click Connect. 5 If the dialog box on the right is displayed, check the contents and click OK. *The contents of the dialog box vary depending on the status of Controller.
Check the contents and click on an appropriate button to proceed with the processing. 6 The dialog box on the right is displayed. Check the contents and click OK.