8. Initialization Method The setting procedures in this document are based on the factory default settings. 8.1. Initializing a Safety Controller Some settings may not be applicable unless devices with the factory default settings are used. To initialize the settings of a Safety Controller, it is necessary to initialize a Communication Control Unit and a Safety CPU Unit. 8.1.1. Initializing a Communication Control Unit Initialize a Communication Control Unit in the following way. Go online with Safety Controller and change the operating mode to PROGRAM mode.
Select Communication Control Unit from the Controller Selection Box in the Multiview Explorer, and select Clear All Memory from the Controller Menu. The Clear All Memory Dialog Box is displayed. Check the contents and click OK . 36