5.2. Device Configuration The hardware components to reproduce the connection procedures in this guide are as follows: In this document, the Safety Controller is connected only to the unit power supply. The I/O power supply is not used. Personal computer (Sysmac Studio installed, OS: Windows 10 ） NX-CSG320 + NX-SL5700 Make reference to a generic device LAN cable LAN cable i Pendant Power supply Precautions for Correct Use Prepare the compressed CIP device file specified above beforehand. To obtain the file, contact OMRON Corporation.
6 Manufacturer Name Model Version OMRON NX-series Safety CPU Unit NX-SL5700 Ver.1.1 OMRON NX-series Communication Control Unit NX-CSG320 Ver.1.3 － Power supply (24 VDC) for the Safety Controller － OMRON Sysmac Studio SYSMAC-SE2□□□ Ver.1.24.2 OMRON Compressed CIP device file (Refer to Precautions for Correct Use on use below) CIP Safety XXXXX.zip _ _ * XXXXX is a unique name for each target device to be added － Personal computer (OS:
Windows 10) － － LAN cable (STP (shielded, twisted-pair) cable of Ethernet category 5 or higher) － ― Robot controller (connection confirmed device Robot Controller It conforms to each company's Type EtherNet/IP Communication Function Refer to the manual provided by robot manufacturer Teach Pendant －