SC-B9580 User's Guide Appendix B Move to the back of the printer and raise the media loading lever. E Lower the media loading lever. The pressure rollers on which the spacers are installed are immobilized, so they do not move even if the lever is lowered. C Remove the spacers from where they are stored. How to remove spacers A Move to the back of the printer and raise the media loading lever. D Insert the spacers into the holes on the back side of the rollers that you confirmed in Step 1. Insert the spacers until they are deep inside a total of 4 pressure rollers, 2 each on the left and the right. If they are only inserted shallowly, they may come out while the printer is operating.
B Move to the back side and remove the 4 spacers and return them to where they are stored. 121