SC-B9580 User's Guide Introduction B Status display area Displays the printer's status and warning messages. Only the most recent notifications are shown in this area. You can check all warning notifications by pressing . When a print job is received, the displayed content changes as shown below. The following provides an explan‐ ation of each display. Displays a thumbnail of the image being printed and the file name. A thumbnail image may not be shown, depending on the type of RIP being used. Displays a progress bar showing the printing progress. Displays the Printed Length for the media, Remaining Print Length for the media, Time until media re‐ placement, or the Pass Mode.
Pressing the display area while printing displays the screen to set the display details for . Select one item that you want to display. Time until media replacement displays the estimated time. Displays the estimated time until printing is complete. This is the Pause (Suspend) button. Press this button and select whether to stop printing immediately ( Immediate pause ) or stop after printing the current page (or job if it is a single page) ( Pause between pages ). Pressing Resume on the screen during a pause resumes printing. However, if you select Immediate pause , printing may become disrupted when printing restarts.
Appears as the Start button while warming up, until the heater reaches the set temperature. Pressing this button starts printing, even if the heater temperature is low. C Media info Displays the name and number of the currently selected registered media, as well as the width of the currently loaded media. When Remaining Amount Management is set to On , the remaining amount of the loaded media is also displayed. Pressing this area displays the Media Settings from the settings menu where you can change to a different registered media number or change the settings for the media number that is currently selected. 17