SC-B9580 User's Guide Basic Operations Caution: ❏ Follow the instructions in the manual when loading media or roll cores or removing media from the take-up roll. Dropping media, roll cores, or take-up rolls could result in injury. ❏ Be sure that your hands or hair do not get caught in the media feeding unit or the auto take-up reel unit while it is operating. Failure to observe this precaution could result in injury. Important Points for Correct Take-up Loading into the Auto Take-up Reel Unit You need the following items when loading media into the auto take-up reel unit. Prepare these in advances to start work smoothly. Observe the following points for correct take-up of media.
❏ Prepare a roll core that is longer than the width of the take-up media. This ensures that the media can be correctly taken-up without extending beyond the edges of the roll core. ❏ Take-up roll core longer than the width of the media ❏ Commercially available adhesive tape ❏ Media smaller than 36 inches wide may move around and be taken up incorrectly. After the media has been fed to the position of the auto take-up reel unit, press How To... on the screen to load the media while checking the procedure on the panel's screen. Follow the on-screen instructions. ❏ Do not attach take-up roll cores like the ones shown in the following figure.
The take-up tension will be uneven and the core will spin loosely. As a result, the paper cannot wind correctly, which may cause banding in the print results. Edges are worn You can also watch the video on YouTube. Deformed Epson Video Manuals Replacing the Media This section explains how to replace media with another media while there is still media remaining, and how to replace media with new media when the media ends. 41