SC-B9580 User's Guide Maintenance Disposing of Waste Ink When a message is displayed indicating it is time to replace the waste ink bottle Precautions When Replacing the Waste Ink Bottle Replace the waste ink bottle with a new bottle immediately. ❏ Be sure to confirm that the waste ink tube is inserted in the mouth of the waste ink bottle. Check that the stopper is stuck close to the mouth When a message is displayed, press How To... You can check the procedure on the control panel while replacing the waste ink bottle. ❏ Unless you are prompted to do so by on-screen instructions, never remove the waste ink bottle while printing or while performing Head Cleaning. Waste ink may leak.
time When you want to replace the waste ink bottle due to night operations and so on before the message is displayed indicating that it is time to replace the bottle, follow the steps below to replace the waste ink bottle. If you do not follow the steps below, you will not receive a message at the correct replacement interval next time. Replacing the Waste Ink Bottle There are two methods for replacing the waste ink bottle as described below. Use the appropriate replacement method to suit your situation. A Press on the screen, and then press Replace Waste Ink Bottle . Read the following before starting this procedure. U “Precautions Regarding Maintenance” on page 62 B Press How To...
to view the procedure. Follow the on-screen instructions to perform the procedure. 66 of the bottle. If there is a gap, waste ink may splatter and stain the surrounding area. ❏ You will need the lid for the waste ink bottle when disposing of waste ink. Keep the lid in a safe place; do not throw it out. c Important: When the message The waste ink bottle is nearing the end of its service life. is displayed, prepare a new waste ink bottle as soon as possible. See the following when replacing the waste ink bottle at this stage in the procedure. U “When you want to replace it at any time” on page 66 When you want to replace it at any