SC-B9580 User's Guide Maintenance E U to drip from the cleaning stick. c Important: If hooked sections are not positioned correctly, return to Step 3 to attach them again. Otherwise, the head may be damaged. F While holding the tabs of each media edge plate on both sides, move both the plates to the left and right edges of the platen respectively. c Important: Releasing the tab fixes the media edge plate. ❏ Do not use cleaning liquid that you have already used for cleaning to clean the next time. Using dirty cleaning liquid will make staining worse. ❏ Used cleaning liquid is industrial waste. Dispose of them in the same way as for waste inks.
U “Handling Used Consumables” on page 71 ❏ After using the cleaning liquid, tightly close the lid of the cleaning liquid and store it at room temperature out of direct sunlight and away from high temperatures or humidity. G Close the left maintenance cover and printer cover. Using Cleaning Liquid Only use cleaning liquid to clean the parts indicated in the manual. Do not use it to clean the capping station. Before starting this procedure, be sure to read the following: 69 Check that two hooked sections at the rear of the media edge plate are securely applied as shown below and that they are attached with no gap between the platen and media edge plate.
“Precautions Regarding Maintenance” A Put the cup supplied with the cleanin the tray, and pour approximately 10 oz.) of cleaning liquid into the cup. B Dampen the cleaning stick with clea When doing this, do not allow cleani Dampen the cleaning stick with clea When doing this, do not allow cleani