SC-B9580 User's Guide Control Panel Menu 89 Item Parameter Explanation Information Printing at Media Cut Media Remaining Information On Prints information, such as the remaining amount of media, when media is removed or replaced. When Media Remaining Information is set to On, the following information is printed on the unused side from the cut position. To print the media remaining information, set Remaining Amount Management in Media Settings to On. ❏ Model: Model of the printer ❏ Serial No.: Serial number of the printer ❏ F/W Version: Firmware version of the printer ❏ Print Date: Date and time of printing ❏ Bank No.: Media number when printing ❏ Media Type:
Media type registered to the media number when printing ❏ Media Width: Automatically detected value of media width ❏ Remaining Amount: Remaining amount of media When Print Information is set to On, the following information is printed on the printed side of the cut position. ❏ Model: Model of the printer ❏ Serial No.: Serial number of the printer ❏ F/W Version: Firmware version of the printer ❏ Print Date: Date and time of printing ❏ Bank No.: Media setting number when printing ❏ Media Type: Media type registered to the media setting number when printing ❏ Media Width: Automatically detected value of media width ❏ Print Length:
Amount of media used If you want to cut the left and right corners of the media when preparing it for the next loaded media, set Print Position to Center. Off* Print Information On Off* Print Position Right* Center Heater Start Heating on Power On Sets the time to start preheating the heater. When Start Heating on Power On is set, preheating starts automatically when the printer is turned on and started up, regardless of the media loading status. For Start Heating Manually, press the Preheat Start button on the Home screen to start preheating.
Start Heating Manually* Media Feeding Start Feeding on Power On* Sets the behavior of media settings, such as the media type and roll winding specifications, when the printer is turned off and back on again when media is loaded. When Start Feeding on Power On is set, paper feeding starts immediately using the current settings without displaying the Media Settings screen. For Start Feeding Manually, paper feeding starts after you have made settings on the Media Settings screen displayed. Start Feeding Manually