SC-T7630D/SC-T5630DM User's Guide Introduction ❏ Do not use a dryer to dry the print outs. U “General Settings” on page 126 ❏ Avoid direct sunlight. ❏ Prevent color distortion while displaying or storing the print outs by following the instructions in the paper's documentation. Note: When the printer enters sleep mode, the control panel's screen goes blank as if the power has been turned off, but the power light remains on. Note: Typically, print outs and photos fade over time (color distortion) due to the effects of light and various constituents in the air. This also applies to Epson special media. However, with the correct storage method, the degree of color distortion can be minimized.
Power Off Timer The printer is equipped with a Power Off Timer option that automatically turns the printer off if no errors occur, no print jobs are received, and no control panel or other operations are performed for a set period of time. You can set the time until the printer automatically turns off from 30 minutes to 12 hours. ❏ See the documentation supplied with Epson special media for detailed information on handling the paper after printing. The factory default setting is Off . You can perform Power Off Timer from the “General Settings” menu. ❏ The colors of photos, posters, and other printed materials appear different under different lighting conditions (light sources * ).
The colors of print outs from this printer may also appear different under different light sources. * Light sources include sunlight, fluorescent light, incandescent light, and other types. U “General Settings” on page 126 Saving Power The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can adjust the time before power management is applied. Any increase will affect the product’s energy efficiency. Please consider the environment before making any changes. Sleep mode The printer enters sleep mode when there are no errors, no print jobs being received, and no control panel or other operations performed.
When the printer enters sleep mode, the control panel's screen turns off and the internal motors and other parts switch off to consume less power. Sleep mode is cleared if a print job is received or a button on the control panel is pressed. You can set the time before entering sleep mode from 1 to 120 minutes. At default settings, the printer enters sleep mode if no operations are performed for 15 minutes. You can change the Sleep Timer in “General Settings”. 21