Super Micro SC808 Chassis User Manual: 1U Twin™ Server Guide PDF (EN)

S UPER ® SC808 Chassis Series USER’S MANUAL 1.0b SC808T-1200W SC808T-980V SC808T-980B SC808T-780B SC808LT-780B

Стр. 1

SC808 Chassis Manual The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent. IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” WARNING:

Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 1.0b Release Date: December 16, 2009 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2009 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America ii

Стр. 2

Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SC808 1U chassis. Installa­ tion and maintenance should be performed by experienced technicians only. Supermicro's SC808 1U chassis features a unique and highly-optimized design for 1U Twin™ servers. The layout and chassis design provides 2 nodes in 1U and up to 84 nodes in a 42U standard rack, which significantly reduces IT space costs. With double the connectivity, each node also supports dual 3.5" hot-swap drive bays.

The SC808 chassis reduces cost by providing higher power efficiency and provides simplified cabling, better air flow, and easier maintenance. The Gold Level high-efficiency 1200W power supply makes this high-density server chassis even more powerful! Bulk package and quick release slide rails are also available for HPC and datacenter use. This document lists compatible parts available when this document was published. Always refer to the our Web site for updates on supported parts and configura­ tions. iii

Стр. 3

SC808 Chassis Manual Manual Organization Chapter 1: Introduction The first chapter provides a checklist of the main components included with this chassis, and describes the main features of the SC808 chassis. This chapter also includes contact information. Chapter 2: System Safety This chapter lists warnings, precautions, and system safety. You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed before installing and servicing this chassis. Chapter 3: Chassis Components Refer here for details on this chassis model including the fans, bays, airflow shields, and other components. Chapter 4:

System Interface Refer to this chapter for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Chapter 5: Chassis Setup and Maintenance Follow the procedures given in this chapter when installing or removing components, or reconfiguring your chassis. Chapter 6: Rack Installation Refer to this chapter for detailed information on chassis rack installation. You should follow the procedures given in this chapter when installing, removing or reconfiguring your chassis into a rack environment. iv

Стр. 4