Chassis SC822 User's Manual Removing the Dummy Drive from the Drive Carrier 1. Remove the drive carrier from the chassis as described in the previous section and lay it on a flat surface. 2. Remove the two screws securing the dummy drive to the drive carrier. 3. Lift the dummy drive from the drive carrier. Caution: Except for short periods of time (swapping hard drives), do not operate the server with the drive carriers removed from the bays, regardless of how many drives are installed, for proper airflow. Dummy Drive 2 Drive Carrier 2 Figure 3-3. Removing a Dummy Drive from the Drive Carrier 28