VEICHI — 1.3.3 Specifications and Electric Parameters

1 Abstract 1.3.3 Specifications and Electric Parameters AC SERVO DRIVE MODLE SD700-3R3A-PA 1PH 200V-240V 50Hz/60Hz IP20 INPUT CONT MAIN 1PH 200V-240V 50Hz/60Hz 1PH:5.6A OUTPUT 3PH 0V-240V 0Hz-500Hz 3.3A SER NO Scan to download the detailed manual. 危险 DANGER 请务必按照使用说明书的指示操作. 本产品有内置电机过热保护回路. Must read the manual before installing. 断电10分钟内,以及CHARGE充电指示灯未 熄灭,请勿触摸电源端子部位,有触电危险. Motor overtemerature protection is not provided. 警告 WARNING Risk of electric shock. Don't touch power terminals for 10 minutes after turning OFF or CHARGE indicator is lit. 为了防止触电,必须连接好地线. Never fail to connect protective Earth( ) terminal. 注意 CAUTION Hot surface-risk of burn. Don't touch heatsink. 请勿触摸散热器,有烫伤的危险.

400-600-0303 Suzhou Veichi Electric Co.,Ltd. 苏州伟创电气科技股份有限公司 MADE IN CHINA 5 SD700 Series Servo Technical Manual Specification 1R1A 1R8 A 3R3A 5R5A 7R6A 9R5A 2R5D 3R8D Size A B Continuous output current /Arms 1.1 1.8 3.3 5.5 7.6 9.5 2.5 3.8 Maximum output current /Arms 3.9 6.3 11.6 16.5 22.8 23.8 7.5 11.4 Secificatio n 120A 160A 6R0D 8R4D 110D 170D 240D 300D Size C D Continuous output current /Arms 12.0 16.0 6.0 8.4 11.0 17.0 24.0 30.0 Maximum output current /Arms 36.0 40.0 18.0 25.2 27.5 42.5 60.0 70.0 Specificatio n 500D 600D 700D 800D 121D 171D 221D 321D Size E F