Arlo Essential Indoor Camera 2nd Generation Use the pairing button to wake up the camera Press and hold the pairing button for 3 seconds. The camera wakes and the LED flashes blue for two minutes. Follow the instructions in the Arlo Secure App to add your camera to your Arlo account. Check the LED Status LED The LED on the camera lights up when the camera is powered on. The LED changes color and blinks to indicate the status of activities like pairing the camera and updating the camera firmware. Slow blinking blue . The camera is in the process of pairing to a Wi-Fi network. Fast blinking blue . The camera paired with a Wi-Fi network and connected. Blinking amber .
The camera is out of range, a connection error occurred during pairing. Alternating blue and amber . A firmware update is in process. Test motion detection You can use the motion detection test to customize the right motion sensitivity setting for your camera. 1. Open the Arlo Secure App. 2. Tap Devices and then tap the Menu icon in the upper right corner. 9 Get Started User Manual