CHECKTIREPRESSURE ,/'CHECKLIST The tires on your tractor were overin- flated at the factory for shipping pur- poses. Correct tire pressure is important for best cutting performance. Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual. BEFOREYOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT. CHECK DECK LEVELNESS PLEASE REVIEW THE FOLLOWING CHECKLIST: For best cutting results, mower housing should be properly leveled. See "TO LEVEL MOWER HOUSING" in the ,/All assembly instructions have been completed. ,/No remaining loose parts in carton.
,/Battery is properly prepared and charged. (Minimum 1 hour at 6 amps). ,/Seat is adjusted comfortably and tightened securely. /All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory). ,/Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling). ,/Check mower and drive belts. Be sure Service and Adjustments section of this manual. they are routed properly around pulleys and inside all belt keepers. ,/Check wiring. See that all connections are still secure and wires are properly clamped.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA A'I-I'ENTION TO THE FOLLOWING IMPORTANT ITEMS: ,/Engine oil is at proper level. ,/Fuel tank is filled with fresh, clean, regular unleaded gasoline. ,/Become familiar with all controls - their location and function. Operate them before you start the engine. ,/Be sure brake system is in safe operating condition. 10