TO ASSEMBLE GRASS CATCHER ENGINE 1. Put grass catcher frame into grass bag with rigid part of bag on the bottom. Make sure the frame handle is outside ENGINE SPEED Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to an authorized service center for repair and adjustment. CARBURETOR of the bag top. 2. Slip vinyl bindings over frame. NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using. _I, CAUTION:
Do not run your lawn mower without clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open. Your carburetor has a non-adjustable fixed main jet for mixture control. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to an authorized service center for repair and/or adjustment. IMPORTANT: Never tamper with the engine governor, which is factory set for proper engine speed.
Overspeeding the engine above the factory high speed setting can be dangerous, if you think the engine-governed high speed needs adjusting, contact your nearest autho- rized service center, which has proper equipment and experience to make any necessary adjustments. Catcher ...._ "- frame handle Frame opening 15