Generac Portable Products 2,100 PSI High Pressure Washer KNOW YOUR PRESSURE WASHER Read this owner’s manual and safety rules before operating your high pressure washer. Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Accessory Tray High Pressure Hose Spray Gun Recoil Starter Throttle Control Lever Chemical Injection Siphon/Filter Oil Fill/Dipstick Air Filter Choke Lever High Pressure Outlet Water Inlet Adjustable Nozzle Pump equipped with Automatic Cool Down System Accessory Tray — Provides convienant storage for standard and optional accessories, such as brushes, turbo wands, ect. Choke Lever — Prepares a cold engine for starting. High Pressure Hose — Connect one end to water pump and the other end to spray gun. Adjustable Nozzle — Always attached to nozzle extension. Adjustable nozzle allows you to adjust spray pressure and spray pattern. High Pressure Outlet — Connection for high pressure hose.
Oil Fill/Dipstick — Check and fill with oil here. Air Filter — Dry type filter element limits the amount of dirt and dust that gets in the engine. Pump — Develops high pressure. Automatic Cool Down System — Cycles water through pump when water reaches 140°-145°F. Warm water will discharge from pump onto ground. This system prevents internal pump damage. Recoil Starter — Used for starting the engine manually. Spray Gun — Controls the application of water onto cleaning surface with trigger device. Includes safety latch. Throttle Control Lever — Sets engine in starting mode for recoil starter and stops a running engine.
Chemical Injection Siphon/Filter — Use to siphon detergent or other pressure washer chemicals into the low pressure stream. Water Inlet — Connection for garden hose. 4