7 SOAK Select soak to add extra soaking period to the wash cycle. You can press soak button and hold 3 sec when you want to spin only. Safety Instructions Features Operation Requirements Installation Instructions Washer Use Washer Care Troubleshooting 8 DELAY Press to select a time when you want the cycle to begin. Hold delay button for 3 sec to turn on end of cycle signal. 9 EXTRA RINSE Press to add an extra rinse to the wash cycle. Press again to cancel. 10 Digital display The initial display is the total time for the cycle you select.While your washer is running, the display shows the cycle process and time remaining in the cycle. Note:
the time shown is an estimate based on normal operating conditions. External factors (such as the load size, room temperature, incoming water temperature, and water pressure) can a ect actual time. If you set a delay time for the start of the cycle affect the display shows the time when the cycle will start. 27