WARNING Safety Instructions Features Operation Requirements Installation Instructions Washer Use Washer Care Troubleshooting • Plug the power cord into an AC 120V/60Hz wall socket rated at 15 amps or higher. Use the socket for this washer only. Do not use an extension cord. - Sharing a wall socket with another appliance, using a power strip, or extending the power cord may result in electric shock or fire. - Do not use an electric transformer. lt may result in electric shock or fire. - Make sure that the power voltage, frequency and current match the product’s specifications. Failing to do so may result in electric shock or fire.
• Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis. - Unplug the power plug and clean it with a dry cloth. - Failing to do so may result in electric shock or fire. • Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor. - If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire. • Plug the power plug into the wall socket firmly. Do not use a damaged power plug or loose wall socket, because this may result in electric shock fire.
• Do not pull or excessively bend the power cord. Do not twist or tie the power cord. • Do not hook the power cord over a metal object. Place a heavy object on the power cord, insert power cord between objects, or push the power cord into the space behind the appliance, because this may result in electric shock or fire. • Do not pull the power cord when unplugging the power plug. - Unplug the power plug by holding the plug. - Failing to do so may result in electric shock or fire. • If the power plug or power cord is damaged, contact your nearest service center. • Do not install on carpet. Install the washer on a level and solid floor that can support its weight.
Failure to do so may result in abnormal vibration, noise or problems with the product. • The washer is heavy. Two or more people may be needed to install and move the appliance. Failure to do so may result in bodily or other injuries. • Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to do so may result in serious leak damage. • Position the appliance so that the power plug is easily accessible. Failure to do so may result in electric shock or fire due to an electrical short circuit. • Failure to follow all of the safety warnings in this guide may result in property damage or injury to persons. 6