WARNING! drawer. 4 C7085-90921 Chapter 3 Installation and configuration 49 1 Unpacking the printer Note Save all of the packing materials in case you need to repack and transport the printer at a later date. 2 3 CAUTION The prepared location must be level (not more than a 2° angle), able to support up to 77 kg (169 lb), and must support all four corners of the 500-sheet paper feeder (serves as printer base). 2 Place the 500-sheet feeder in the prepared location. CAUTION Avoid bending the guide pins while assembling the printer. 3 Using the guide pins for proper alignment, carefully assemble the printer and accessories.pen the ITB drawer and remove the packing tape, then close the drawer.
4 Open the ITB drawer and remove the packing tape, then close the