10 2 2 Align the imaging drum over the drawer so that the arrow on top points to the rear of the printer, and the blue end cap on the side slides into the slot identified with the blue arrow. 3 Slide the imaging drum down into place. 4 Push the front upper drawer shut. Wait while the printer runs an internal color calibration. The calibration takes a few minutes. When the printer is ready, the control panel displays READY . 4 C7085-90921 Chapter 3 Installation and configuration 57 19 Installing the imaging drum CAUTION Avoid exposing the imaging drum to direct light. Exposure to light for more than 15 seconds can seriously damage the imaging drum. 1 Pull open the drum drawer until it stops.
3