Replacing the transfer kit 1 Replace the transfer kit when the printer control panel displays: TRANSFER KIT OUT REPLACE KIT . The transfer kit consists of an intermediate transfer belt (ITB), a transfer roller, two air filters, and a hand wipe. 1 Open the ITB drawer. Remove the used transfer belt by pulling up on the green handles located on the sides. 2 2 Locate the transfer roller inside the printer. 3 To unlock the used transfer roller, gently push back and up (in a rotating motion) on the blue triangles located on the lower corners of the flap that is in front of the roller. 4 Remove the used transfer roller by lifting it up and then out. 3 4 C7085-90921 Chapter 4 Printer maintenance 89