Separating the Engine Module from the Paper Feed Module This procedure is the same for printers with a single 500-sheet Tray or two 250-sheet Trays. 1 Remove the Rear Right Side cover (page 6-6). Remove the Formatter Cage Assembly (page 6-20), Formatter Pan (page 6-39), and 2 long screws from the Tray 1 Pickup Assembly (See Figure 6-26 on page 6-29 and Figure 6-28 on page 6-31). Figure 6-39 Unplugging the connector to the Paper Feed Module 2 Unplug the connector to the Paper Feed Module on the right rear side of the printer (under the formatter pan). Remove the cable from its bracket. 6-42 Removing and Replacing Parts