Table 7-5. Alphabetical Printer Messages (continued) Control Panel Message Event Log Message Explanation Recommended Action DISK IS WRITE PROTECTED The EIO disk is protected, and no new files can be written to it. Disable the write protection through HP JetAdmin. EIO n DISK INITIALIZING The disk accessory card takes a long time to initialize. The first parameter is the accessory slot number for this disk accessory card. EIO n DISK NOT FUNCTIONAL The EIO disk is not working correctly. Remove the EIO disk from the slot indicated. Replace it with a new EIO disk. EIO n INITIALIZING Wait for the message to disappear (approximately 5 minutes).
If the printer EIO card is operating correctly and communicating with the network, this message disappears after approximately one minute and no action is required. If the EIO card is unable to communicate with the network, this message remains for five minutes and then disappears. In this case the printer is not communicating with the network (even though the message is no longer present). The problem may be a bad EIO card, a bad cable or connection on the network, or a network problem. Contact your network administrator. alternates with DO NOT POWER OFF EIO n DISK SPINNING UP The disk accessory is initializing. The first parameter is the accessory slot number for this accessory card.
7-20 Troubleshooting