Table 7-5. Alphabetical Printer Messages (continued) Control Panel Message Event Log Message Explanation Recommended Action UNABLE TO MOPY JOB Memory or file system failures would not allow a mopy job to occur. Only one copy will be produced. UNSUPPORTED SIZE IN TRAY [YY] An external paper handling device detected an unsupported paper size. The printer will go offline until the condition is corrected. Load a supported paper size in the tray. USE [TYPE] [SIZE] INSTEAD? If the requested paper size or type is not loaded, the printer asks if it should use another paper size or type instead. 1. Press [-Value+] to scroll through the available types and sizes. 2.
Press [Select] to accept the alternate type or size. WAIT FOR PRINTER TO REINITIALIZE The RAM disk setting has been changed from the printer’s Control Panel. This change will not take effect until the printer reinitializes. Wait for the printer to reinitialize. WRONG ENVELOPE FEEDER INSTALLED The Envelope Feeder you are trying to install will not work for this printer. Install the correct Envelope Feeder instead. 7-28 Troubleshooting