Table 7-15. Curl Possible Cause Action Paper does not meet printer specifications or is stored improperly. 1. Print a few more pages to see if the problem corrects itself. 2. Turn over the stack of paper in the tray. Also try rotating the paper 180°. 3. Check the paper (or other print media) type and quality. Replace the paper, and advise the customer to use the recommended paper and store it properly. Printer’s operating environment does not meet specifications. Make sure the printer’s operating environment meets specifications. Wrong output bin. Print to a different output bin (top or Rear Output Bin). Wrong Fuser setting for paper type.
From the Paper Handling Menu on the Control Panel, change the Fuser mode setting or choose another paper type from the printer driver. See also “Dropouts” on page 7-65. 7-62 Troubleshooting