Table 3-14. Changing the Page Count (continued) Key Press Display Description [Select] PAGES=0 00 0000 * Advance the cursor one digit to the right. [Value +] PAGES=00 1 0000 * Increase the value of the third digit by one. [Select] PAGES=0 0 1 0 000 * Enter the change to the third digit and advance the cursor one digit to the right. [Select] PAGES=0010 0 00 * Advance the cursor one digit to the right. [Value +] (4 presses) PAGES=0010 4 00 * Increase the value of the fifth digit by four. [Select] PAGES=00104 0 0 * Enter the change to the fifth digit and advance the cursor one digit to the right. [– Value] (2 presses) PAGES=00104 8 0 * Decrease the value of the sixth digit by two.
[Select] (2 presses) PAGES= 0 010480 * Enter the change to the sixth digit and advance the cursor one digit to the right causing the cursor to wrap around to the first digit. [Go] To exit. Maintenance Page Count The maintenance page count should be reset only after a maintenance kit has been installed. This will reset the maintenance counter so that the message PERFORM PRINTER MAINTENANCE will display another 200,000 pages later (default). G Hold down the [– Item] and [ – Value] keys. G Turn the printer on. G Wait for RESET MAINTENANCE COUNT to be displayed and then release both keys. Service Mode 3-35