Preventative Maintenance The preventative maintenance cycle for this printer is every 200,000 pages. To order the maintenance kit see page 8-2. The kit contains the following replacement parts: G One Fuser G One Transfer Roller G One Tray 1 Roller G Three Feed Rollers G Three Separation Rollers Refer to the instructions included in the kit for detailed replacement procedures. Reset Maintenance Count After the PM kit has been installed, reset the maintenance count. 1 Turn the printer off. 2 While pressing [– Item] and [– Value] turn the printer on. RESET MAINTENANCE COUNT appears, followed by INITIALIZING . After a few seconds READY appears. Preventative Maintenance 4-5