The ADF pick roller assembly The upper pick roller assembly and document feed guide are user replaceable parts, but the ADF separation pad is not. These instructions appear in chapter 3 of this manual and are repeated here. If the ADF has trouble picking paper, the ADF pick roller assembly may need to be replaced: 1 1 Unplug the power cord from the product. If you have a 220V product, turn off the power switch. 2 2 Remove the input tray and open the ADF cover. 3 3 Press the round green button while lifting the green lever. Rotate the green lever until it stops in the open position. The old pickup roller assembly should remain on the black surface.
4 4 Remove the old assembly and put the new one in exactly the same place. The largest roller goes in back, and the gear side will face away from you. 120 Chapter 5 - Removal and replacement EN