Back cover 1 Remove the right side cover (page 113) and open or remove the left side door (page 129). Note The back cover can be removed without removing the left side door, but removing the back cover removes the support for the left side door leaving it vulnerable to breakage. 2 Open the straight-through output door. 3 Remove two screws (callout 1) from the back of the product. 21 2 2 Figure 45. Removing the back cover (1 of 2) Note The back cover has two tabs (not shown), one on the side of the printer and one on the bottom. You may want to use a screwdriver to press on the side tab (callout 2). 130 Chapter 5 - Removal and replacement EN