NVRAM init NVRAM init sets all stored parameters in NVRAM back to factory default values or to a default ROM value, depending on the variable, and performs a system reset. CAUTION Performing NVRAM init can cause the product to violate local telephone regulations. Reset the language and country code after performing NVRAM init. NVRAM init resets the following:
All menu settings to factory default values, including fax header and company name Factory settings such as formatter number, page counts, and factory paper settings Fax memory—all faxes in memory are erased All localization settings, including language and country code To perform NVRAM init 1 Unplug (or turn off) the product from the power source. 2 Press and hold down the * and menu/enter keys. 3 Continue to hold down the keys while you plug back in (or turn on) the product, through the entire power on sequence. 4 When the control panel display reads Permanent Storage Init. release the keys. 5 Allow the product to return to Ready before using the product.
PJL software commands You can use PJL software commands to set the following NVRAM variables: Factory printer DEFAULT PAPER, scanner factory default paper size will be set to the same value automatically. Factory printer DEFAULT LPARM:PCL SYMSET Factory DEFAULT OEM bit Factory DEFAULT PRINTPAGECOUNT Factory DEFAULT SCANPAGECOUNT Factory DEFAULT COPYPAGECOUNT EN Service mode functions 233