Skywell — SF5 product manual (EN)

Important tips The original accessories of JINKANG SERES brand have been tested to ensure that they are well compatible with the performance, safety and emission system of your vehicle. In order to ensure the performance and safety of your vehicle as much as possible, you must use the original accessories of jinkangxilis when you carry out vehicle maintenance or vehicle repair. 。 Please follow the following important precautions to help ensure a safe and perfect trip for you and your passengers. ● Driving under the influence of alcohol or drugs is strictly prohibited. ● Be sure to concentrate when driving.

Anything that distracts you may cause collision accidents, such as adjusting control buttons, answering and making calls, etc. 。 If you use parts not originally made by JINKANG SERES, it may adversely affect the performance and safety system of your vehicle. Therefore, the company will not be responsible for any problems. Please do not modify any part, vehicle information and identification of your vehicle without permission. The modification may affect the performance, safety or durability of the whole vehicle, or even violate national laws and regulations. The company will not bear any responsibility for the direct or indirect losses caused by this.

In addition, it may also cause you to lose your maintenance or warranty rights. ● Obey the traffic rules, limit the speed, and do not drive over speed or overload. ● During driving, please wear the safety belt all the way. If there are children on the vehicle, please use a suitable child safety seat and fix it on the rear seat. ● It is forbidden to leave children alone in the car, and do not let children use or carry keys. ● To avoid personal injury, it is forbidden to touch any high-voltage cable, high-voltage plug and connecting plug on the vehicle. The installation of radio equipment on the vehicle may affect the normal use of the electrical system.

The following regulations shall be strictly observed when using radio equipment: ● Follow the instructions on the warning label. ● Non professional maintenance personnel are strictly prohibited to disassemble the power battery and related high-voltage components. ● Do not install or change the radio equipment, otherwise it may cause some electrical system faults. ● The operating environment of the vehicle shall be free of corrosive, explosive and insulating gas or conductive dust, and shall be far away from the heat source. ● It is strictly prohibited to crush and puncture the power battery to damage the battery system.

● When using the radio equipment, please observe the local regulations of the vehicle. ● Do not park the vehicle in places with strong electromagnetic interference such as transformers ● If the power battery is found to be leaking or damaged, please do not touch it. If you accidentally touch it, please wash it with a large amount of water and get medical attention in time. ● It is strictly prohibited to dispose and store waste power batteries without permission. Please contact Chongqing Jinkang new energy after-sales service center for disposal. Regular professional maintenance is helpful to keep the vehicle in good running condition and prolong the service life of the vehicle.

Please carefully read the maintenance related information in the manual and recommend you to carry out routine maintenance in accordance with the correct maintenance requirements. If your vehicle runs in a harsh environment, the vehicle needs more and better maintenance. If the vehicle fails due to no maintenance or improper maintenance, You may lose your warranty rights. The vehicle is equipped with an event data recording system (EDR), which is integrated into the airbag controller.

When the trigger threshold is reached (triggered when the speed change is greater than 8km / h within 150ms and locked when the speed change is greater than 25km / h within 50ms), the vehicle longitudinal acceleration, vehicle VIN, vehicle speed and brake pedal status are recorded. After the collision event, the above information can be read through the diagnostic tool. 3