Front seat 1 2 3 4 Picture: Seat forward/backward/height adjustment button 5 Picture: correct driving position In order to protect your safety to the utmost extent, the seat, headrest, seat belt and airbag must be used together. Proper use of these safety devices can ensure better protection. 1 Move the seat forward/backward and release the adjustment 2 Adjust the tilt angle of the seat up/down, and release the adjustment button button when it is adjusted to a suitable position. 6 Adjust the seat position so that the seat belt is properly worn while staying as far away from the front airbag as possible:
3 Adjust the seat height up/down, and release the when it is adjusted to a suitable angle. adjustment button when it is adjusted to a suitable angle. ● Sit upright with your feet on the floor and the seat back should not tilt more than 30°. 7 ● Make sure you can easily step on the pedals, bend your arms slightly when holding the steering wheel, and leave at least 25 cm between the chest and the center of the airbag cover. ● Place the middle part of the seat belt between the neck and shoulders, and wrap the overlapping part of the seat belt tightly around the hip joint, not the abdomen.
8 The front seat slide rail is adjusted to the final position, and the backrest is at an angle of 25° from the vertical. 9 10 11 Picture: Backrest tilt angle adjustment button Toggle the electric button for adjusting the angle of the outer backrest of the seat back and forth. After the angle is adjusted to a suitable angle, release the angle adjustment button. Seat and safety 31